Portable Smile Mini USB Skincare and Cosmetics Cooler Fan Hand-Held
Water spray battery fan is revolutionary personal cooling device
developed by it Works! Unlike conventional misting products which
may get you or your clothes wet, This product produces cold water
into cool air flow to keep you cool anytime under the sun or at
home. Water spary takes advance cooling technology step into a
lightweight mobile cooling device. Designed to be used on the go,
Hand-held air condition runs on batteries (or USB) for ture
portability and versatility. Simply soak the cellulose
sponge(included)with water and tum the power on, Portable air
cooling fan will instantly provide you with blasting cool air with
hours of relief from the heat.
1*Water Spray Battery Fan
3*Mini Travel Electric Fan
5*Cooling With Mist
Combines water evaporation with fan: Works as an air conditioner as
well as a humidifier.
1. Easy to use: Put the soaked sponge into the cooler body, insert
batteries or connect USB port, and it begins to work.
2. Working modes: Cooling & fan mode and fan mode (take the
sponge away when you don't need the cooling function).
3. Power supply choices: 4 x AA batteries, USB port, and power
adapter. (batteries Not included) C
Omes with a high quality reusable sponge.
90 degree vertical airflow control for optimal wind blowing.
Fan speed adjustable.
Cute and lightweight, easy to carry.
30° F reduction is possible.
Enjoy breeze and moisture of spring anytime anywhere.
1. For best performance, use fresh alkaline batteries
2. Open battery compartment door, insert batteries following (+/-)
3. Open the back cover and take out the foam and then fill with
4. You can place the cold water into the foam.
5. Warning! ! ! Do not freeze water in foam.
6. To turn the fan on and off, press the ON/OFF button located on
the back of the fan once.
7. If fan does not operate, check that batteries are installed
properly. To spray mist, press the trigge
1 x Mini Air Conditioner Fan
1 x Sponge
1 x 60ml Water Bottle
1 x USB Cable
1 x User Manual
1. Please get the sponge out and soak it (not dripping) before use.
2. Don't inject water directly while the sponge is in the cooler
body; Otherwise the internal parts will be damaged.
3. After work and no use for a long time, get the sponge out, clean
it, and keep it dry.
4. Add some drops of fragrance into the water and the output air
will be nice-smelling.